Pipe line flowmeter. Your small caliber gas and compressed air flowmeter

The VPFlowScope® on-line flowmeter is ideal for using point consumption measurements. It can measure mass flow, temperature and pressure at the same time, and it is two-way. It can be used as an in-line air flowmeter or an in-line gas flowmeter. This in-line flowmeter is ideal for smaller diameters, and it produces all the data you need to optimize your compressed air and gas consumption. VPFlowScope On-line flowmeters offer different units of measurement. It can be used as a CFM air flowmeter or a CFM gas flowmeter. Another option is to use it as an m3/hr air flowmeter or m3/hr gas flowmeter. With the VPFlowScope® online flowmeter, you can not only see your energy consumption, but also check the efficiency of your distribution network as well as the true savings potential. It provides all the data necessary to make good decisions every day.

On the bright blue display, you can see the data in real time, but if you want to do more analysis, you can combine this instrument with the built-in data logger so you can record in a certain amount of time. When you install our VPStudio software on your PC, you'll be able to crunch data, print reports, and do intelligent analysis to figure out where and how your organization can save money.

The characteristics and advantages of this on-line flowmeter

> ThermabridgeTM technology

> High dynamic range

> An instrument has four sensors: flow, pressure, temperature and total flow

> Standard Modbus and 4... 20 mA

> bidirectional

> Quick return on investment

The application of this on-line flowmeter

> Itemized measurement of compressed air and/or industrial gases

> Technical gas flow monitoring (nitrogen, oxygen, helium, argon, carbon dioxide; Any dry and non-corrosive gas).

> Leakage management

> Energy monitoring

> Cost allocation

> Condition monitoring of pneumatic equipment

> Can provide 16 bar | 250 psi and 35 bar | 500 psi solution

> Ring network (bidirectional measurement)

One-stop shopping: VP Pipe flowmeter Starter Kit

VPInstruments offers a starter kit for the VPFlowScope online flowmeter; Offers a complete set of things you need to get started right away at a very affordable price. You don't have to worry about ordering everything individually, or gathering everything you need in order to do an audit or install. You just order the kit and go. You can choose from the following sizes:

> 0.5 "VP pipe type flowmeter Starter Kit

> 1 "VP Pipe type flowmeter Starter Kit

> 2 "VP Pipe type flowmeter Starter Kit

The package includes:

> VPFlowScope® On-line flowmeter with display and built-in data logger in the size of your choice.

> ISO calibration report

> A mini USB cable for connecting to the free VPStudio software

> Pipe kits with thread are available for your choice: BSP or NPT

> Cable, some options:

   > Power adapter with 5-pin connector or

   > 5 m | 16.4 ft cable, M12 plug on one side, on the other side is open cable, used for permanent installation.